CUTBACK BITUMEN MC-30, MC-70

Batra Company Limited manufactures cutback bitumen which is blend of Bitumen with petroleum solvents to meet specific project requirements. We can manufacture both Medium set Slow Set and Rapid Set. In Kenya most requirement is the MC30, MC70 and Rarely MC3000. All our cutback products as mentioned earlier, complies with KEBS and BS standards.

1. PrimeMC30 the conventional Mc30

PrimeMC30 is the conventional MC30 primer, ideally made from blending Bitumen 80/100 with Kerosene, its characterized by its low viscosity and medium cure of binder to provide a penetration greater than 3mm into the base course in readiness for overlay, whether hot or cold mix course or surface dressing works.

Its compliant to ASTM 02027 or AASHTO M82 suitable for use in the construction & maintenance of pavement as designated in ASTM 02399, it is ideal for prime coat to dense surfaces.

Prime MC30 is applied to asphalt or granular surfaces preferably by using truck mounted spray equipment to provide for accurate spray rates. PrimeMC30 is available in both Drums and Bulk supply.

2. PrimeMC70 Medium Cure Asphalt Cutback Mc70

PrimeMC70: the conventional MC70 primer is ideally made from blending Bitumen 80/100 with Kerosene, its characterized by its low viscosity and medium cure of binder to provide a penetration greater than 3mm into the base course in readiness for overlay, whether hot or cold mix course or surface dressing works.

Its compliant to ASTM D2027 or AASHTO M82 suitable for use in the construction of pavement as designated in ASTM D2399, it is also ideal for prime coat, open graded surfaces like GCS and DBM.

PrimeMC70 is applied to asphalt or granular surfaces preferably by using truck mounted spray equipment to provide for accurate spray rates. PrimeMC70 is available in both Drums and Bulk supply.

3. PrimeMC3000 Medium Cure Asphalt Cutback Me 3000

PrimeMC3000: the conventional MC3000 primer is ideally made from blending Bitumen 80/100 with Kerosene and Diesel depending on client requirements, its characterized by its medium to low viscosity and medium cure of binder to provision of a sealing course in readiness for chipping in surface dressing works.

Its compliant to ASTM D2027 or AASHTO M82 suitable for use in the construction of pavement as designated in ASTM D2399, it is ideal for tack coat and seals.

PrimeMC3000 is applied to asphalt or granular surfaces preferably by using truck mounted spray equipment to provide for accurate spray rates. Typical rates are 0.65-1.75 Liters/m. PrimeMC3000 is available in both Drums and Bulk supply.